11-20-2008 02:25 AM - edited 03-15-2019 02:39 PM
11-20-2008 03:39 AM
Hello,
Please try to brief the problem..
Nahas
11-20-2008 08:12 PM
I have a Cisco UC500 with 7 ip phones and one Wireless access point. So inter communication is working fine but following issues are having.
⢠One way voice issue (out calls)- I can make outbound PSTN calls through the UC500, the receiver received relevant call and can hear voice of sender but sender could not hear.
⢠Ringing tone is does not here (out calls)- Do not hear the dial tone when dial a number for outbound through uc500 but no issue for intercom call
⢠Call is not terminate (incoming call from out side)- When out going call make the receiver could not terminate the call while sender can terminate it.
Pls help to solve the above issues.
11-21-2008 10:42 AM
Hi,
I just want to know Which PSTN connection you are using, PRI/FXO . Post your configuration..
Nahas
11-23-2008 10:00 PM
11-24-2008 01:09 AM
Hi
Configure one command in dial-peer 50,51,52,53
-- forward digits all
hope this help
Nahas
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide