Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UC520 as h323 Gateway and CME simultaneously

Hi,

I would like to know whether I can configure UC520 as h323 gateway for CallManager and at the same time I install CME on it ?

If possible, how is the connection betwen CUCM and CME ?

Thanks

  • IP Telephony
6 REPLIES
Hall of Fame Super Gold

Re: UC520 as h323 Gateway and CME simultaneously

Yes, it is no problem.

However since the datasheet says CUCM is not supported, the TAC will not support you on that aspect.

Re: UC520 as h323 Gateway and CME simultaneously

That is correct. TAC will not support this type of configuration. All you need to do to accomplish is set the UC520 up as an H323 gateway in CUCM and configure your voip dialpeers on your UC520 to point to the CUCM.

New Member

Re: UC520 as h323 Gateway and CME simultaneously

Hi,

Thanks for the answer.

For example I have this scenario :

UC520 with CUE (CME license)

let say I will forward a DN on CUCM to a virtual DN on CME then all the calls to the Virtuan DN on CME will be forwarded to VM (CUE)

is it possible ?

How is the configuration ?

Thanks

Hall of Fame Super Gold

Re: UC520 as h323 Gateway and CME simultaneously

ephone-dn xx

call-forward all

However if you're just trying to integrate CUE to CUCME, just do that directly.

New Member

Re: UC520 as h323 Gateway and CME simultaneously

How is the connection between CCM and CUCME if i want to use the UC520 as h323 gateway and CUCME simultaneously ?

I cannot add another trunk with UC520 IP Address since it's already configured as h323 gateway

Appreaciate your help

Thanks

Hall of Fame Super Gold

Re: UC520 as h323 Gateway and CME simultaneously

As H.323 GW is enough, then you configure some route pattern to use it.

565
Views
15
Helpful
6
Replies
This widget could not be displayed.