Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UC520 Call Blocking

Is there a way to block specific inbound numbers via the UC520. I have a customer who wants to block all 800, 866, unknow and private numbers coming into the UC520?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: UC520 Call Blocking

Use Translation rules that will work just like in regular CME, give it a try.

config t

voice translation-rule 1

rule 1 reject /#/

rule 2 reject /#/

*where # is the number that you wish to block.

config t

voice translation-profile BLOCK_NUMBER

translate incoming 1

Assign this translation profile to the incoming dial-peer that you are using.

HTH

//Jorge

1 REPLY

Re: UC520 Call Blocking

Use Translation rules that will work just like in regular CME, give it a try.

config t

voice translation-rule 1

rule 1 reject /#/

rule 2 reject /#/

*where # is the number that you wish to block.

config t

voice translation-profile BLOCK_NUMBER

translate incoming 1

Assign this translation profile to the incoming dial-peer that you are using.

HTH

//Jorge

322
Views
0
Helpful
1
Replies