Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UC520 Fax to email

Hi, i want to use an fxo connected to pstn to receive a fax and send it to email throught the uc520. I have try to use the thoses line of command :

application

service FaxMail flash:app_faxmail_onramp.2.0.1.3.tcl

fax receive called-subscriber $d$

fax interface-type fax-mail

mta send subject Vous avez recu un fax -

mta send with-subject $s$

mta send origin-prefix "Cisco-Powered Fax System"

mta send mail-from hostname blahblah.net

mta send mail-from username faxserver

mta send return-receipt-to username $s$

voice-port 0/1/3

cptone CA

timeouts call-disconnect 1

timeouts wait-release 2

connection plar 5551234

description FAX to SERVICE Dept

caller-id enable

dial-peer voice 777 pots

description FAX to SERVICE

service faxmail

information-type fax

incoming called-number 5551234

fax rate disable

direct-inward-dial

dial-peer voice 200 mmoip

description FAX to SERVICE Dept

service fax_on_vfc_onramp_app out-bound

destination-pattern 5551234

information-type fax

session target mailto:blahblah@blah.net

I see the call arrived on the fxo but match no "outgoing" dial-peer.

My ios version is :

uc500-advipservicesk9-mz.124-11.XW8

Someone have install this on uc520 and working fine ?

161
Views
0
Helpful
0
Replies