Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UC520 not allowing another call to conference call

Hi,

UC520 is not letting another caller to be added to an existing conference call, when I try to add another person and hit conference it disconnects one of the callers from ongoing conference call. I have a 64 channel DSP installed.

thanks

hasrat

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: UC520 not allowing another call to conference call

Hi Hasrat,

The octo-line config won't come into play here

This config setting;

max-conferences 8 gain -6

relates to the number of simultaneous Conferences not the number of

participants;

look for;

max-conference participants

Have a look at this excellent doc from Tony @ Cisco;

https://www.myciscocommunity.com/docs/DOC-1486

Cheers!

Rob

7 REPLIES
Hall of Fame Super Red

Re: UC520 not allowing another call to conference call

Hi Hasrat,

A 3-party Conference is the default on the uc520

UC 500 DSP: Conference and Transcoding Capabilities/Limitations

https://supportforums.cisco.com/docs/DOC-9744

Software Conference: Default conference option for UC500. Software conferencing enables 3-party ad-hoc conferencing capabilities and is enabled by default for a maximum of 8 conferences (8x3).

Cheers!

Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727

New Member

Re: UC520 not allowing another call to conference call

Hi Rob,

Thank you for the reply, do I need to add octo-line to ephone-dn, right now they are configured as dual-line ?

this is what I see under telephony-service regarding conference:

sdspfarm tag 1 conference
max-conferences 8 gain -6

hasrat

Hall of Fame Super Red

Re: UC520 not allowing another call to conference call

Hi Hasrat,

The octo-line config won't come into play here

This config setting;

max-conferences 8 gain -6

relates to the number of simultaneous Conferences not the number of

participants;

look for;

max-conference participants

Have a look at this excellent doc from Tony @ Cisco;

https://www.myciscocommunity.com/docs/DOC-1486

Cheers!

Rob

New Member

Re: UC520 not allowing another call to conference call

Hi Rob,

excellent document, followed it and I am seeing this:

uc520(config-dspfarm-profile)#maximum sessions ?
  <1-2>  Number of sessions assigned to this profile

it is not allowing me to add more than 2 sessions.

thanks

hasrat

New Member

Re: UC520 not allowing another call to conference call

Hi Rob,

I did not apply ephone-dn for ad-hoc, once I added them it is working.

thanks for the document.

hasrat

Hall of Fame Super Red

Re: UC520 not allowing another call to conference call

Hi Hasrat,

Don't forget that each DSP is related to a Conf profile as shown below. Your profile must be set up in mixed mode. Your original question referenced the number of participants not the number of sessions:)

voice-card X Replace X with slot number where the DSPs reside
dsp services dspfarm Enable dspfarm services
!
sccp local FastEthernet0/0 Specify local SCCP interface
sccp ccm 192.168.10.1 identifier 100 version 4.0 Configure IP address of call-agent to register sccp/use version 4.0
sccp Enable SCCP
!
sccp ccm group 1 Define SCCP group
associate ccm 100 priority 1 Associate sccp identifier with ccm group
associate profile 1 register confprof1 Configure sccp profile name
!
voice class custom-cptone jointone Optional – configure join tone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
!
voice class custom-cptone leavetone Optional – configure leave tone
dualtone conference
frequency 400 800
cadence 400 50 200 50 200 50
!
dspfarm profile 1 conference Configure dspfarm conference parameters
codec g711ulaw Configure codecs that are allowed to participate – by default all codecs are supported
codec g729r8 Configure codecs that are allowed to participate – by default all codecs are supported
conference-join custom-cptone jointone Specify jointone - optional
conference-leave custom-cptone leavetone Specify leavetone - optional
maximum conference-participants 8 Configure max conference participants per conference
maximum sessions 8 Configure maximum number of conferences
associate application SCCP Activate SCCP application
no shut Enable dspfarm profile

Each DSP can support a maximum of 16 G.711/G.729A/G.729 participants (mixed-mode), so this translates to:

• 2 conferences of 8 participants each

Cheers!

Rob

New Member

Re: UC520 not allowing another call to conference call

Hi Rob,

This is the config related to conference, it is still not working:

!
voice-card 0
dspfarm
dsp services dspfarm
!
!
sccp local Vlan10
sccp ccm 172.18.1.30 identifier 1 version 6.0
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register confprof1
!
dspfarm profile 1 conference
codec g711ulaw
maximum conference-participants 8
maximum sessions 8
associate application SCCP
!
telephony-service
sdspfarm units 1
sdspfarm tag 1 confprof1
conference hardware
max-conferences 8 gain -6
!

thanks

hasrat

880
Views
5
Helpful
7
Replies