Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UC520, phones showing different times

Hi, Ive just done a factory reset on my UC520 and am currently not running CUE. I've set the router clock and set the timezone using the console, and set the CUE time using the web interface.

However, one phone is showing the correct time, the other is not. Im only running 2 phones at the moment.

I've noticed if I reboot them, the phone that boost 1st gets the correct time, the second phone is 8 hours ahead.

Im a bit puzzled..

8 REPLIES
Hall of Fame Super Gold

Re: UC520, phones showing different times

Have you set timezone under telephony-service ?

is the router synced to NTP ?

Which phones are these and which FW do they have ?

New Member

Re: UC520, phones showing different times

Hi. They're not synched to NTP as they're sort of stand alone at the moment. I've set the time zone under telephony serivice to 21, UK.

phones are 7941's running 7941g_64-02070631Amd64megRel.bin

This all worked fine before I did the factory reboot so I assume all the firmwares are OK, I think im just missing something somewhere

Hall of Fame Super Gold

Re: UC520, phones showing different times

Hi, factory reboot may have changed the firmware. What you have can be see with "show telephony service" or device status in the phone.

You might need an upgrade now.

New Member

Re: UC520, phones showing different times

Ok. Spookily both phones now appear to be 7 minutes fast too..... i'll initiate CUE now to see if that helps

Hall of Fame Super Gold

Re: UC520, phones showing different times

Cue won't help. Either set clock manually on the router with "update hardware", better would be you synch off an NTP server and forget about it.

New Member

Re: UC520, phones showing different times

ah so i cant install CUE and point my CME NTP server at my CUE IP address? just a thought as this wont be able to see an NTP server for a while.

Hall of Fame Super Gold

Re: UC520, phones showing different times

The thing is that both cue and cme, normally are ntp clients. Is not thta cue has a better idea of time than cme in any manner.

New Member

Re: UC520, phones showing different times

well i've implimented cue now and all the handset times are now correct.

Spooky.

Cheers for your input mate.

301
Views
5
Helpful
8
Replies