Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UC520 SIP trunk

I have configured this on the UC520 but cant make any calls, anyone that can help me?

voice translation-rule 1

rule 1 /^.*\(..\)/ /\1/

!

!

voice translation-profile manyTo1

translate called 1

dial-peer voice 4000 voip

translation-profile incoming manyTo1

session protocol sipv2

incoming called-number .

!

dial-peer voice 4001 voip

destination-pattern 0T

session protocol sipv2

session target ipv4:82.99.32.86

dtmf-relay sip-notify

1 REPLY
Silver

Re: UC520 SIP trunk

send output of the following:

show sip-ua register status

debug ccsip messages all

139
Views
0
Helpful
1
Replies