Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

UC520 with VIC2-2BRI-NT/TE

I have a UC520 with Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(11)XW7, RELEASE SOFTWARE (fc2).

I have installed a VIC2-2BRI-NT/TE interface Cards in UC520, now i have 4 ISDN Basic Rate interfaces.

i want to use one of the 4 interfaces as Internal ISDN for a FAX-Server on MS Windows SBS 2003, (with a Eicon BRI Card).

how cann i do it ? with CCA 1.6 is not passible or i dont how.

Thanks for your help

Jan

3 REPLIES
Hall of Fame Super Gold

Re: UC520 with VIC2-2BRI-NT/TE

Hi,

first of all you might not even need the eicon card. CME/CUe can receive/send fax, convert to email, even on a per-user basis.

This said, you cannot use the CCA for anything more than basic configuration. This one would require you prepare crossed BRI cables, then configure like:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a008010ef6c.shtml

Hope this helps, please rate post if it does!

New Member

Re: UC520 with VIC2-2BRI-NT/TE

Thanks for your very fast Answer,

How can i configure the UC520 for recive/send Fax ? do you have a link for a Document.

How work the receive/send fax on CME/CUE ?

i have multiple ISDN-Nr (MSN) from ISP and i want to use one of the number for fax receiving.

how cann i send a fax from Win-PC-Client ?

Is a FAX-Server oder Network-Modem Emulation on UC520 ?

Best Regards und Thanks for your help

Jan

Hall of Fame Super Gold

Re: UC520 with VIC2-2BRI-NT/TE

Hi,

do you have a qualified partner helping you with the uc500 ? That is very necessary most most advanced configurations. You may loose a lot of time and get frustrated when you have no experience in these things. For fax relay, see:

http://www.uc500.com/fax-email-using-uc500-or-cme

More information is in cue and cme system administrator guides.

As a recogniotn to tose providing answers, please rate useful posts with the scrollbox below!

557
Views
10
Helpful
3
Replies
CreatePlease to create content