05-17-2008 11:23 AM - edited 03-15-2019 10:43 AM
I have a UC520 with Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(11)XW7, RELEASE SOFTWARE (fc2).
I have installed a VIC2-2BRI-NT/TE interface Cards in UC520, now i have 4 ISDN Basic Rate interfaces.
i want to use one of the 4 interfaces as Internal ISDN for a FAX-Server on MS Windows SBS 2003, (with a Eicon BRI Card).
how cann i do it ? with CCA 1.6 is not passible or i dont how.
Thanks for your help
Jan
05-17-2008 11:30 AM
Hi,
first of all you might not even need the eicon card. CME/CUe can receive/send fax, convert to email, even on a per-user basis.
This said, you cannot use the CCA for anything more than basic configuration. This one would require you prepare crossed BRI cables, then configure like:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a008010ef6c.shtml
Hope this helps, please rate post if it does!
05-18-2008 12:59 AM
Thanks for your very fast Answer,
How can i configure the UC520 for recive/send Fax ? do you have a link for a Document.
How work the receive/send fax on CME/CUE ?
i have multiple ISDN-Nr (MSN) from ISP and i want to use one of the number for fax receiving.
how cann i send a fax from Win-PC-Client ?
Is a FAX-Server oder Network-Modem Emulation on UC520 ?
Best Regards und Thanks for your help
Jan
05-18-2008 01:24 AM
Hi,
do you have a qualified partner helping you with the uc500 ? That is very necessary most most advanced configurations. You may loose a lot of time and get frustrated when you have no experience in these things. For fax relay, see:
http://www.uc500.com/fax-email-using-uc500-or-cme
More information is in cue and cme system administrator guides.
As a recogniotn to tose providing answers, please rate useful posts with the scrollbox below!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: