Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UC520

Hi. I need configure the FXS port, in the Cisco UC520. The Cisco Configuration Assistant show error messages, and I would like configure the analog phone from the CLI .. I can configure the analogic phone connected to FXS from the CLI ??? How I can do it??

thanks

7 REPLIES
Hall of Fame Super Gold

Re: UC520

If you want dual-line and features, follow the guide for "FXS port in SCCP mode" that is contained in the administration guide. In fact, the UC520 do come pre-configured for that already.

Else, configure a regular pots DP pointing to the port, that is enough.

New Member

Re: UC520

Thanks. p.bevilacqua

I want configure single line in the analog phone. The configuration of the FXS is empty, as following:

voice-port 0/0/0

!

Hall of Fame Super Gold

Re: UC520

Check if the port actually register as ephone. Recommend you configure as SCCP mode so the will be able to transfer calls, a common request.

It's all explained in the guide, you will either read it, or give the job to a professional.

New Member

Re: UC520

I resolve my problem :D

voice-port 0/0/0

station-id name Phone01

station-id number 800

dial-peer voice 800 pots

destination-pattern 800

port 0/0/0

:D

Hall of Fame Super Gold

Re: UC520

Sure, but be prepared to answer "you can't" when user ask "how do I transfer a call ?".

New Member

Re: UC520

you are right, but I dont know to enable SCCP in FXS port :(

(How could I know the MAC address of the FXS)

Thanks

p.bevilacqua

Hall of Fame Super Gold

Re: UC520

In the manual it tells you how, with clear examples. Also, the default configuration file for UC520 has all the commands in there already.

Leave auto-registration on, the port registers and you see the mac with "show ephone".

881
Views
0
Helpful
7
Replies