UC540 Auto Attendant can't dial / reach Analog Extensions of the FXS Ports
I've got this strange issue. Our UC540 is working for the most part. The only problem we have left is when people dial into the Auto Attendant and they try to dial the extensions of our analog phones running off of the FXS ports, it errors out saying "invalid extension". From those analog phone we can dial out fine, we can dial to/from other phones analog and digital. What could be the issue?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...