Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

uc540 with ip communictor

                  hi all,

i am having 2 uc540 devices in different places.

there is site to site vpn between these two boxes for multisite configuration and also remote vpn also configured on bot the devices.

my issue is i am using ip communicator for remote user , when i connect to vpn client of branch A the ip communicator is working , when i connect to BranchB it is not registering to that branch . it is still looking for branch A TFTP server ,  i am manully changing the TFTP server ip on the ipcommunicator.

no luck and i tried with different mac address for different sites also the same.

is there any possible way to configure 2 different extension for different system with single ip communicator.



Everyone's tags (2)
Hall of Fame Super Gold

uc540 with ip communictor

When a phone or CIPC looks for another TFTP, that means the configured TFTP address is not responding, and is using a previous one as backup. So check your VPN connectivity.

You cannot register CIPC to two different systems.

New Member

Re:uc540 with ip communictor

i cannot register single CIPC software in single pc to 2 different uc 540 devices?

there is no other solution for this.

New Member

Re:uc540 with ip communictor

Vpn is fine . I can reach the system through vpn.

Sent from Cisco Technical Support Android App