I installed CCM 6.1 and UCCX. i create all the mobility extension on CCM and users accordingly. UCCX showing my users detials and i configuared all the things accordingly. But when i login my phone the UCCX real time monitoring always shows logged out.
First, your post indicates that you have logged in to Extension Mobility on the phone but does not mention whether you logged in to CAD or IPPA. These are two separate and independent steps. Can you confirm that you have also logged into CAD or IPPA?
Second to expand on Michael's response: Extension Mobility is only required when you are using hot desking or the agent will be logging in from more than one phone. If you're not doing this, feel free to place the ACD line directly on the phone as it saves the agent a step every morning.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...