Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UCM 6.1 Xcode/Conf Resources

cannot get hardware conference/transcode resources to register. sccp shows up, cause code is tcp_conn_error. Used same process I use in CM4.2 DSP's are up.

no sccp/sccp doesnt help. Selecting IOS Enhanced in UC6.1 Thoughts are welcome

7 REPLIES

Re: UCM 6.1 Xcode/Conf Resources

Can you paste your SCCP configs

New Member

Re: UCM 6.1 Xcode/Conf Resources

CNHKGNRT301#sho sccp

SCCP Admin State: UP

Gateway IP Address: 172.21.125.130, Port Number: 2000

IP Precedence: 5

User Masked Codec list: None

Call Manager: 10.5.139.197, Port Number: 2000

Priority: 2, Version: 5.0.1, Identifier: 2

Call Manager: 10.5.135.196, Port Number: 2000

Priority: 1, Version: 5.0.1, Identifier: 1

Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: TCP_CONN_ERROR

Active Call Manager: NONE

TCP Link Status: NOT_CONNECTED, Profile Identifier: 2

Reported Max Streams: 8, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 30

Supported Codec: g711alaw, Maximum Packetization Period: 30

Supported Codec: g729ar8, Maximum Packetization Period: 60

Supported Codec: g729abr8, Maximum Packetization Period: 60

Supported Codec: g729br8, Maximum Packetization Period: 60

Supported Codec: g729r8, Maximum Packetization Period: 60

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code: TCP_CONN_ERROR

Active Call Manager: NONE

TCP Link Status: NOT_CONNECTED, Profile Identifier: 1

Reported Max Streams: 32, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 30

Supported Codec: g711alaw, Maximum Packetization Period: 30

Supported Codec: g729ar8, Maximum Packetization Period: 60

Supported Codec: g729abr8, Maximum Packetization Period: 60

Supported Codec: g729r8, Maximum Packetization Period: 60

Supported Codec: g729br8, Maximum Packetization Period: 60

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

CNHKGNRT301#sho sccp ccm gr 1

CCM Group Identifier: 1

Description: None

Binded Interface: Loopback99, IP Address: 172.21.125.130

Associated CCM Id: 1, Priority in this CCM Group: 1

Associated CCM Id: 2, Priority in this CCM Group: 2

Associated Profile: 2, Registration Name: APHKXCODE

Associated Profile: 1, Registration Name: APHKCFB

Registration Retries: 3, Registration Timeout: 10 sec

Keepalive Retries: 3, Keepalive Timeout: 30 sec

CCM Connect Retries: 3, CCM Connect Interval: 10 sec

Switchover Method: GRACEFUL, Switchback Method: GRACEFUL_GUARD

Switchback Interval: 10 sec, Switchback Timeout: 7200 sec

Signaling DSCP value: cs3, Audio DSCP value: ef

sccp local Loopback99

sccp ccm 10.5.139.197 identifier 2 priority 2 version 5.0.1

sccp ccm 10.5.135.196 identifier 1 priority 1 version 5.0.1

sccp

!

sccp ccm group 1

bind interface Loopback99

associate ccm 1 priority 1

associate ccm 2 priority 2

associate profile 2 register APHKXCODE

associate profile 1 register APHKCFB

!

dspfarm profile 2 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729br8

codec g729r8

maximum sessions 4

associate application SCCP

!

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 4

associate application SCCP

New Member

Re: UCM 6.1 Xcode/Conf Resources

What are the names of the resouces in your callmanager? Are they APHKXCODE and APHKCFB?

Re: UCM 6.1 Xcode/Conf Resources

Does the names match in CUCM as specified in IOS configs

New Member

Re: UCM 6.1 Xcode/Conf Resources

You would think to CCIE Voice guys would have something better to do!!!

Also - Use standard IOS and not enhanced!

New Member

Re: UCM 6.1 Xcode/Conf Resources

Yep, names match exactly. Tried Standard, same problem. Is "no sccp / sccp" the correct way to reset from cli? Maybe its an IOS problem. version is 12.4(9)T7

New Member

Re: UCM 6.1 Xcode/Conf Resources

I have the same problem.

558
Views
0
Helpful
7
Replies