Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UCM 6.12 Database Replication Status

I had some problems with phones registered to my subscriber and had to reboot. Is it normal in real time monitoring tool for the replication status on the subscriber to be 0? Both the publisher and Cluster show a status of 2.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: UCM 6.12 Database Replication Status

You might want to try a utils dbreplication reset all

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/7_0_1/cli_ref.html#wp62592

Give it about an hour or so and see what your replication status is.

Hope this helps! If you find this post useful, please rate it.

Thanks,

John

1 REPLY
Cisco Employee

Re: UCM 6.12 Database Replication Status

You might want to try a utils dbreplication reset all

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/7_0_1/cli_ref.html#wp62592

Give it about an hour or so and see what your replication status is.

Hope this helps! If you find this post useful, please rate it.

Thanks,

John

304
Views
0
Helpful
1
Replies