Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

UCM 7.1.3 - Updating the publisher IP Address on Subscriber using Terminal

Is it possible to update the publishers IP address on a subscriber without using the web GUI and OS Administration tool?

I've changed the IP of the publisher in my lab but the subscriber still has the old details when I run a "show tech network hosts"

Because I've removed the Subscriber from the cluster (and re-booted both Pub & Sub) I cannot now get onto the Subscriber using the web GUI to change the address.

Failing all of this, can I re-build the subscriber, thus wiping the original node details from it? Is it just a case of popping the DVD in and reloading it?

Everyone's tags (1)
3 REPLIES
Green

UCM 7.1.3 - Updating the publisher IP Address on Subscriber usin

Hi,

Look at this document

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/ipchange/ipchg712.html#wp41994

Changing the IP address of PUB that is defined by IP address

HTH

Alex

Please rate useful posts

Regards, Alex. Please rate useful posts.
Community Member

UCM 7.1.3 - Updating the publisher IP Address on Subscriber usin

Unfortunately this will not work if the Subscriber cannot connect to the current Publisher.

What I need to know is how to amend the IP address of the publisher on the Subscriber through the terminal. (This may not be possible).

Green

UCM 7.1.3 - Updating the publisher IP Address on Subscriber usin

Hi,

I think you are only left with the option to delete the sub server from the pub

You will loose all the feature you have configure using the sub like MOH,call park etc etc

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/b02servr.html

Then add the sub server with it new address and rebuild via the DVD

You will need to rebuild to the exact version of the pub.

HTH

Alex

Regards, Alex. Please rate useful posts.
308
Views
0
Helpful
3
Replies
CreatePlease to create content