Re: UCM 8.5 > Need output of phones along with ip address
So is there a select * from command I can run from CallManager CLI to get a list of phones and ip addresses? I can capture CLI output to .txt and make a .csv ? or AXL?
The data on phone IP addresses isn't kept in the main CUCM database, so there's no SQL (or AXL) you can use to get this. You have to use the RisPort API set to get this information. There is some (very poor) sample code on the developer.cisco.com website on how to do this.
Alternatively, buy an app that does it for you already
PS - Have you tried just copy-and-pasting the table from CCMAdmin ? It works surprisingly well !
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...