Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

UCM 8 and CP-9971

Hi All !!!

Can anybody help me assign an extantion number on the right buttons column.

I have a 6 buttons on the left, and I very simply add ext number there.

Device -> Phone -> DeveceName -> Association Information -> Add a new SD

But if I try to chang buttons 7 and more nothing  :-(

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

UCM 8 and CP-9971

Oleg,

Gordon is correct, the buttons on the Right are "Call Session" buttons and their solely purpose is to manage existing calls.  There is no way to configure them otherwise, if you need more buttons you need to get a Key Expansion Module.

HTH,

Chris

4 REPLIES

UCM 8 and CP-9971

Sorry, you can't.

GTG

Please rate all helpful posts.
Hall of Fame Super Silver

UCM 8 and CP-9971

Oleg,

Gordon is correct, the buttons on the Right are "Call Session" buttons and their solely purpose is to manage existing calls.  There is no way to configure them otherwise, if you need more buttons you need to get a Key Expansion Module.

HTH,

Chris

New Member

UCM 8 and CP-9971

Hi Chris !

Thank you very much for your answer.

One more.  Can you explain me how I can change phone's languege ?

Hall of Fame Super Silver

UCM 8 and CP-9971

Sure, you first need to download proper language pack for your CUCM version from software download section on CCO  and then install on CUCM after which you will be able to select the new language as the locale.

HTH,

Chris

284
Views
5
Helpful
4
Replies
CreatePlease to create content