Hello, I have a call manager bug. I am not goign to open a TAC case for this, because Cisco is charging us for TAC cases. This relates to CM 4.1.3 as well
as 6.0 and maybe 6.1 as well.
Let's take a look at an example. You have Calling search space X containing partition A. Calling search space Y contains partition B. There is a translation pattern in partition A. An incomming gateway has a calling search space X, which ony contains the translation pattern. The translation pattern has a calling search space Y. There is also a CTI port in partition B.
When you perform a call through the gateway to the CTI port you get a busy tone. The only solution is to assign a calling search space to the original gateway which contains both partitions A and B.
This is not specific to any specific scenario or call manager service release. It alwas appears once a CTI port gets involved.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...