UCM Data Dictionary SQL Query for Determining IP Address
I am trying to determine the IP address(es) of the UCM cluster servers. Using the UCM Data Dictionary and tables such as 'processnode' will provide information such as
procnodename description isactive macaddr procnodeid systemnode typenodename typeprocessnode ================================= ========================== ======== ======= ========== ========== ============ ==================== EnterpriseWideData t 1 t Subscriber CUCM Voice/Video usa109-s4pub01 UCM 10.0 Publisher t 2 f Publisher CUCM Voice/Video usa109-s4sub01 UCM 10.0 Subscriber t 3 f Subscriber CUCM Voice/Video usa109-s4cup01.lab.shoregroup.com UC Presence 10.0 Publisher t 9 f Publisher CUCM IM and Presence usa109-s4cup02.lab.shoregroup.com UC Presence 10.0 Publisher t 11 f Subscriber CUCM IM and Presence
'callmanager' table does not provide a field for IP...'processnode' only had 'ipv6name' field...
If the node using DNS to resolve name-to-IP as shown above...I have not found a way to obtain the IP address of the UCM node itself. I know I can go to the CLI of a node a issue a command to obtain...but I have not found a Data Dictionary table to obtain the results.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...