Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UCM ver 7.0.1.11000-2 and DST patch Nov 2009

Does anybody knows if I need to apply a DST patch for this particular Version of Call manager, if so what is the patch description, thanks

4 REPLIES

Re: UCM ver 7.0.1.11000-2 and DST patch Nov 2009

Hello,

Please refer to the following link:

http://www.cisco.com/en/US/ts/fn/632/fn63213.html

But to answer your question, you need to be running at least 7.0.1.11002-1 or 7.0.1.21022-2 or higher.

Hope that helped, if so please rate.

New Member

Re: UCM ver 7.0.1.11000-2 and DST patch Nov 2009

So does this means that I can apply the patch or I dont need to apply any patch to my cluster?

Re: UCM ver 7.0.1.11000-2 and DST patch Nov 2009

You will need to upgrade to one of the versions that I mentioned or higher. To be safe I would just go with the latest version of 7.0.1.

Hope that helped, if so please rate.

New Member

Re: UCM ver 7.0.1.11000-2 and DST patch Nov 2009

so in few words i will need the DST patch, but before i do that i will have to upgrade the version of my cluster

127
Views
0
Helpful
4
Replies