Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

UCM6.1 Route Groups and SIP Trunks

I have the following case:

I need to configure a route group that contain 3 SIP Trunks, however in the Rout Group configuration page the SIP Trunks are not listed under the availabe devices. I'm using UCM 6.1.5.10000-10

However, in UCM 7.1 I do have the SIP trunks listed under the available devices for the Rout Group configuration page!

Dose any one have this limitations also?

Regards,

1 REPLY
Super Bronze

Re: UCM6.1 Route Groups and SIP Trunks

Hi

If you have a Route Pattern pointed directly at the Route Group, it will be hidden - remove the RP, and you'll be able to add it to a route group.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
302
Views
0
Helpful
1
Replies
CreatePlease to create content