I have a consult, It´s supported the model Multisite WAN with Centralized Call Processing used the UCMExpress??? I don´t find the model in the SRND for UCMExpress......What´s the considerations over this model?? In this model the Ip phone registration from another remote site via WAN......
The model you describe is best for full Communications Manager systems. UCMExpress is usually for a single site model. That does not mean that you cannot register phones on UCMExpress across the WAN, it is just not recommended. You cannot use SRST routers with UCMExpress. So if the WAN goes down, the phones at the remote sites will be dead.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...