CUCM knows nothing about NICs when installed on UCS, that goes down to your ESXi config and your vSwitch. Also, CUCM on ESXi only uses ONE vNIC, not even sure what you mean it's registered with a 2nd card.
for info My CUCM install on UCS7816, physical installation, when i install the server ofr the first time it was used the 2nd NIC, I try te reboot the server, this later move to 1st NIC, and that's impact the license file (CUCM 8.5), my question is if how I could change to be 2nd NIC as default network card.
You don't choose which card to use, either you use the 1st NIC if not redundancy is configured, or you plug both if you enabled redundancy. There's no option to choose the 2nd NIC as the primary NIC, and the only one that will be plugged.
yes you are right, I use MCS 7800 series, my problem is the license file was generated with the 2nd NIC that's mean that if I plug to 1st NIC the server will be joined on LAN otherwise the CUCM show me that's a error ceritifact not valid (the registation of the license was done on 2nd NIC), actually i try to plug a cable on 2nd but it was not work.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...