Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to block a incoming fraud number --in MGCP cluster

Hi all,

We have one incoming number which we need to block in our entire cluster.

We have MGCP gateway configuration.

We have multiple office with WAN connevctivity with their own PRI and VG

I tried playing with partition CSS and translation pattern blocking NO GO

And even we canot create any translation rule on GW as we do not have a h.323

So how do I block this one perticular incoming number calling our phones in all the regions.

is only contacting telco will fix this issue?

Regards,

Rebecca...

9 REPLIES

Re: Unable to block a incoming fraud number --in MGCP cluster

Hi Rebecca.
If you are using a cenralized call processing model, you can add a translation pattern matching called number and select block this pattern or use a non existing destination as called party transform mask.
Put this translation pattern in css assigned to incoming calls on mgcp gateway config.
In case of a distributed call processing model, you have to add the above TP on all CUCM clusters.

HTH

Regards

Carli

Sent from Cisco Technical Support iPhone App

Please rate all helpful posts "The more you help the more you learn"
New Member

Unable to block a incoming fraud number --in MGCP cluster

Hello carli!!

Thx for u r reply..!!

we are having multisite with centralised dplymnt design

as we have only one pub with 2 sub's at one location and all the offices are connected over the WAN but they have their own PRI to make outgoing PSTN calls with own boardlines.

Could you share me the doc guide to configure above scenario? which will have one example atleast or steps

I tried multiple stuff and exausted

Do we need to create a translation and transformation patter for all the sites?

Regards,

Rebecca..

Marry Xmas to all !!!!!

VIP Super Bronze

Unable to block a incoming fraud number --in MGCP cluster

Please refer to this documentation, if you are running cucm 8 or above..

https://supportforums.cisco.com/docs/DOC-19628

Please rate all useful posts

"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Unable to block a incoming fraud number --in MGCP cluster

Hi,

We are on 9.1

New Member

Unable to block a incoming fraud number --in MGCP cluster

I was going through the same link from yest

How to block Incoming calls in CUCM 8.x based on ANI with MGCP gateway

No Luck may be I am doing some thing wrong..

VIP Super Bronze

Unable to block a incoming fraud number --in MGCP cluster

I suggest you review your steps again and follow the document step by step..It works..

Please rate all useful posts

"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
Cisco Employee

Unable to block a incoming fraud number --in MGCP cluster

Hello Rebecca

Refere to below link, method is the same however this one has more descriptive, Just try once looking into this.

http://ciscovoiceguru.com/6516/ani-based-call-blocking/


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
New Member

Unable to block a incoming fraud number --in MGCP cluster

Hello Nadeem,

Tthe doc link which you have shared has unity connection configuration as well but we do not have unity connection at this moment

I only want to block one specific number for my office and the remote office

so I followed till half of the solution but no go...

Could you let me know till what steps i should follow. we have remote office i want to block it in remote site too as they have own PRI and even call should be blocked in remote office too.

Regards,

Rebecca...

VIP Super Bronze

Unable to block a incoming fraud number --in MGCP cluster

Please share your configuration with us..Please share the screen shots of what you have done....

Can you also do a debug isdn q931 for the number you want to block and send the out put here

Please rate all useful posts

"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
249
Views
8
Helpful
9
Replies
CreatePlease login to create content