Hello.
I have a problem to call from fxs port (2851, H323) to PSTN (E1) or to voip.
Phone connected to FXS port 0/1/1
I can call to 7-digit numbers, but there are 2 couples of call legs for 1 call:
(9 and 225 are pots dialpeer)
Rtr#sh voice call status
CallID CID ccVdb Port DSP/Ch Called # Codec Dial-peers
0x105F1 57A 0x470A7D28 0/1/1 0/3:1 91234567 g711ulaw 225/9
0x105F4 57A 0x4762C298 0/0/0:15.3 0/3:5 *91234567 g711ulaw 9/225
Q1. Is it normal?
Q2. i have dialpeer for long distance calls. i can make call by csim start <Long distance number>
Router shows it in sh dialplan number <Long distance number>, but don't show it in sh dialplan incall 0/1/1 number <Long distance number>
When phone place call, router selects incorrect dial-peer
Who can explain why? :-)
PS.
sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(3d), RELEASE SOFTWARE (fc3)
Thank you