Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Unable to change default Numbering Plan on CUCM 7.0.2

Dear All,

I am trying to change the default numbering plan from NANP to UKNP.

I have installed the locale file "cm-locale-en_GB-7.0.1.3000-1.cop.sgn"

twice from the below location from CCO and rebooted the server.

Voice and Unified Communications >

Cisco Unified Communications Manager Version 7.0 > Unified Communications Manager/CallManager Locale Installer>

7.(1.3000-1)

I still can not pick anything other then NANP under Route Pattern Configuration.

Is anyone aware of any known issues with this ?

Also, this is the NFR edition of the CUCM server. So, not sure if this is anything to do with it.

Many thanks in advance.

Regards,

Zahid

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Unable to change default Numbering Plan on CUCM 7.0.2

You installed a locale (as the name clearly explains) NOT a dial plan.

Download the GB dial plan and install it, there is a section called Cisco International Dial Plan in downloads.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
3 REPLIES
Cisco Employee

Re: Unable to change default Numbering Plan on CUCM 7.0.2

You installed a locale (as the name clearly explains) NOT a dial plan.

Download the GB dial plan and install it, there is a section called Cisco International Dial Plan in downloads.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Unable to change default Numbering Plan on CUCM 7.0.2

you need to doanload dp-ffrxxxx.GB.cop.sgn from international dial plan and install it mate. what you've done is local this is GB english inteface for GUI and phone.

New Member

Re: Unable to change default Numbering Plan on CUCM 7.0.2

Many thanks for this. Someone already pointed out mistake earlier.

Regards, Zahid

190
Views
0
Helpful
3
Replies