IP Phone <--> UCM6.1 <--> 2801 <--> VG200 <--> FXS <--> Analog Phone
I my goal is to route to an analog device using h.323 dialpeers. All devices are connected to the same LAN switch and are on the same VLAN. I have the 2801 configured as an H.323 gateway within CallManager but not the VG200. I have IP Phones configured in CallManager and FXS configured on the VG200 for the analog phones. The IP Phones can call each other and the analog phones can complete calls to each other.
I have configured a dial-peer on the 2801 with a destination-pattern sending the call to the VG200 and a dial-peer on the VG200 pointing back to the 2801.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...