Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Unable to dial out from 6945 when we place call on hold

                   Hi ,

We are unable to dial out when we place call on hold from 6945 model.but it is working fine on 7965 phones.I configured all ephone-dns as a dual-line.

Please help how to resolve it..

CME 8.8 version

3 REPLIES
VIP Super Bronze

Unable to dial out from 6945 when we place call on hold

hi,

can you run the ff debug:

debug ephone state

make a test call and send output here..

can you also send a sh run

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

Unable to dial out from 6945 when we place call on hold

Hi,

Please find the below output

RTR221#debug ephone state
EPHONE state debugging is enabled (state, error)
RTR221#
RTR221#
May 29 14:14:39.308: ephone-40[39/19][SEP0026CBA7CFA2]:SkinnyRestartTransferCollect for line 1 chan 1
May 29 14:14:39.308: ephone-40[39/19]:SkinnyRestartTransferCollect ignored
May 29 14:14:39.308: ephone-40[39/19]:SpeakerPhoneOffHook
May 29 14:14:39.308: ephone-40[39/19]:OFFHOOK
May 29 14:14:39.308: ephone-40[39/19][SEP0026CBA7CFA2]:---SkinnySyncPhoneDnOverlays has activeLine 1 current DN 40
May 29 14:14:39.308: ephone-40[39/19][SEP0026CBA7CFA2]:SEIZE on activeLine 1 activeChan 1
May 29 14:14:39.308: ephone-40[19]:SetCallState line 1 DN 40(-1) chan 1 ref 4079 TsOffHook
May 29 14:14:39.312: DN 40 chan 1 Voice_Mode
May 29 14:14:39.312: dn_tone_control DN=40 chan 1 tonetype=33:DtInsideDialTone onoff=1 pid=389
May 29 14:14:41.056: dn_tone_control DN=40 chan 1 tonetype=0:DtSilence onoff=0 pid=389
May 29 14:14:41.416: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:14:41.416: bulk_sd_search_lists: button= 9 state NOT_IN_SD
May 29 14:14:41.416: dn_tone_control DN=40 chan 1 tonetype=37:DtReorderTone onoff=1 pid=389
May 29 14:14:41.416: ephone-40[39/19][SEP0026CBA7CFA2]:DN 40 disc reason 28 invalid number state SIEZE
May 29 14:14:41.740: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:14:41.740: bulk_sd_search_lists: button= 3 state NOT_IN_SD
May 29 14:14:43.036: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:14:43.036: bulk_sd_search_lists: button= 6 state NOT_IN_SD
May 29 14:14:43.276: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:14:43.276: bulk_sd_search_lists: button= 9 state NOT_IN_SD
May 29 14:14:43.524: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:14:43.524: bulk_sd_search_lists: button= 4 state NOT_IN_SD
May 29 14:14:43.764: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:14:43.764: bulk_sd_search_lists: button= 5 state NOT_IN_SD
May 29 14:15:02.512: ephone-40[39/19][SEP0026CBA7CFA2]:ONHOOK (from phone msgID=7)
May 29 14:15:02.512: DN 40 chan 1 End Voice_Mode
May 29 14:15:02.512: ephone-40[19]:SetCallState line 1 DN 40(-1) chan 1 ref 4079 TsOnHook
May 29 14:15:02.512: ephone-40[39/19]:SpeakerPhoneOnHook
May 29 14:15:02.512: ephone-40[39/19]:---SkinnySyncPhoneDnOverlays is onhook
May 29 14:15:02.512: ephone-40[39/19]:SpeakerPhoneOnHook
May 29 14:15:02.524: dn_tone_control DN=40 chan 1 tonetype=0:DtSilence onoff=0 pid=389
May 29 14:15:03.172: ephone-40[39/19][SEP0026CBA7CFA2]:SkinnyRestartTransferCollect for line 0 chan 1
May 29 14:15:03.172: ephone-40[39/19]:SkinnyRestartTransferCollect ignored
May 29 14:15:03.172: ephone-40[39/19]:SpeakerPhoneOffHook
May 29 14:15:03.172: ephone-40[39/19]:OFFHOOK
May 29 14:15:03.172: ephone-40[39/19][SEP0026CBA7CFA2]:---SkinnySyncPhoneDnOverlays has activeLine 1 current DN 40
May 29 14:15:03.172: ephone-40[39/19][SEP0026CBA7CFA2]:SEIZE on activeLine 1 activeChan 1
May 29 14:15:03.172: ephone-40[19]:SetCallState line 1 DN 40(-1) chan 1 ref 4080 TsOffHook
May 29 14:15:03.172: DN 40 chan 1 Voice_Mode
May 29 14:15:03.172: dn_tone_control DN=40 chan 1 tonetype=33:DtInsideDialTone onoff=1 pid=389
May 29 14:15:05.012: dn_tone_control DN=40 chan 1 tonetype=0:DtSilence onoff=0 pid=389
May 29 14:15:05.376: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:15:05.376: bulk_sd_search_lists: button= 2 state NOT_IN_SD
May 29 14:15:05.804: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:15:05.804: bulk_sd_search_lists: button= 9 state NOT_IN_SD
May 29 14:15:06.228: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:15:06.228: bulk_sd_search_lists: button= 3 state NOT_IN_SD
May 29 14:15:06.480: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:15:06.480: bulk_sd_search_lists: button= 6 state NOT_IN_SD
May 29 14:15:06.720: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:15:06.720: bulk_sd_search_lists: button= 9 state NOT_IN_SD
May 29 14:15:06.960: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:15:06.960: bulk_sd_search_lists: button= 4 state NOT_IN_SD
May 29 14:15:07.196: ephone-40[39/19][SEP0026CBA7CFA2]:
May 29 14:15:07.196: bulk_sd_search_lists: button= 5 state NOT_IN_SD
May 29 14:15:07.200: ephone-40[19]:SetCallState line 1 DN 40(-1) chan 1 ref 4080 TsProceed
May 29 14:15:07.200: ephone-40[19]:SetCallState line 1 DN 40(-1) chan 1 ref 4080 TsRingOut
May 29 14:15:07.200: ephone-40[19]::callingNumber 2020

May 29 14:15:07.200: ephone-40[19]::callingParty 2020

May 29 14:15:07.200: ephone-40[39/19]:Call Info DN 40 line 1 ref 4080 call state 1 called 82936945 calling 2020 origcalled
May 29 14:15:07.200: ephone-40[39/19]:Call Info DN 40 line 1 ref 4080 called 82936945 calling 2020 alternateCalling 2020 origcalled 82936945 calltype 2
May 29 14:15:07.200: ephone-40[39/19][SEP0026CBA7CFA2]:Call Info for chan 1
May 29 14:15:07.200: ephone-40[39/19]:SkinnyDisplayCallInfo No-callingName
May 29 14:15:07.200: ephone-40[39/19]:SkinnyDisplayCallInfo No-calledName
May 29 14:15:07.200: peer_vdb is NULL for DN 40, chan 1 at SkinnyIsPeerNonSCCP
May 29 14:15:09.076: DN: 40, CHAN: 1, voice_hcmask: 0x80000F
May 29 14:15:09.076: DN: 40, CHAN: 1, voice_hcmask: 0x80000F
May 29 14:15:09.076: DN 40 chan 1 End Voice_Mode
May 29 14:15:09.076: DN 40 chan 1 Voice_Mode
May 29 14:15:09.076: dn_tone_control DN=40 chan 1 tonetype=0:DtSilence onoff=0 pid=389
May 29 14:15:09.076: ephone-40[19]:OpenReceive DN 40 chan 1 codec 4:G711Ulaw64k  duration 20 ms bytes 160
May 29 14:15:09.424: ephone-40[19]:OpenReceiveChannelAck:IP 10.93.13.46, port=20528, dn_index=40, dn=40, chan=1
May 29 14:15:09.424: ephone-40[19]:StartMedia 10.219.4.126 port=2000
May 29 14:15:09.424: DN 40 chan 1 codec 4:G711Ulaw64k duration 20 ms bytes 160
May 29 14:15:09.536: ephone-40[39/19][SEP0026CBA7CFA2]:StartMediaTransmissionAck callref 4080 OK
May 29 14:15:09.700: ephone-40[19]::callingNumber 2020

May 29 14:15:09.700: ephone-40[19]::callingParty 2020

May 29 14:15:09.700: ephone-40[39/19]:Call Info DN 40 line 1 ref 4080 call state 1 called 2936945 calling 2020 origcalled 2936945
May 29 14:15:09.700: ephone-40[39/19]:Call Info DN 40 line 1 ref 4080 called 2936945 calling 2020 alternateCalling 2020 origcalled 2936945 calltype 2
May 29 14:15:09.700: ephone-40[39/19][SEP0026CBA7CFA2]:Call Info for chan 1
May 29 14:15:09.700: ephone-40[39/19]:SkinnyDisplayCallInfo No-callingName
May 29 14:15:09.700: ephone-40[39/19]:SkinnyDisplayCallInfo No-calledName
May 29 14:15:13.864: ephone-40[19]:SetCallState line 1 DN 40(-1) chan 1 ref 4080 TsConnected
May 29 14:15:14.700: ephone-40[19]::callingNumber 2020

May 29 14:15:14.700: ephone-40[19]::callingParty 2020

May 29 14:15:14.700: ephone-40[39/19]:Call Info DN 40 line 1 ref 4080 call state 4 called 2936945 calling 2020 origcalled 2936945
May 29 14:15:14.700: ephone-40[39/19]:Call Info DN 40 line 1 ref 4080 called 2936945 calling 2020 alternateCalling 2020 origcalled 2936945 calltype 2
May 29 14:15:14.700: ephone-40[39/19][SEP0026CBA7CFA2]:Call Info for chan 1
May 29 14:15:14.700: ephone-40[39/19]:SkinnyDisplayCallInfo No-callingName
May 29 14:15:14.700: ephone-40[39/19]:SkinnyDisplayCallInfo No-calledName
May 29 14:15:18.976: ephone-40[39/19][SEP0026CBA7CFA2]:HoldButtonPress (allow_toggle = 1)
May 29 14:15:18.976: ephone-40[39/19][SEP0026CBA7CFA2]:HoldButtonPress HOLD activated for DN 40 chan 1
May 29 14:15:18.976: skinny_hold_resume: dn=40 chan=1 s2s=0 state=9 hold=1
May 29 14:15:18.976: ephone-40[19]:SetCallState line 1 DN 40(-1) chan 1 ref 4080 TsHold
May 29 14:15:52.464: DN: 40, CHAN: 1, voice_hcmask: 0x0
May 29 14:15:52.464: ephone-40[39/19][SEP0026CBA7CFA2]:DN 40 disc reason 16 normal state HOLD
May 29 14:15:52.464: DN 40 chan 1 End Voice_Mode
May 29 14:15:52.464: ephone-40[19]:SetCallState line 1 DN 40(40) chan 1 ref 4080 TsOnHook
May 29 14:15:52.464: ephone-40[39/19]:SpeakerPhoneOnHook
May 29 14:15:52.464: SkinnyReportDnState DN 40 chan 1 ONHOOKq  
RTR221#

Unable to dial out from 6945 when we place call on hold

I resolved it.I gone through cisco docs 6945 will suport only one call per line,i assigned same number for second line also.now we are able to receive second call and we can make secind call.

519
Views
0
Helpful
3
Replies
CreatePlease login to create content