11-09-2007 01:52 AM - edited 03-15-2019 07:08 AM
Guys,
I have a 2651 with VIC 2B-S/T TE with 1 X BRI ISDN populated.
I am unable to estable layer 2.
Following message.
Layer 2 Status:
TEI = 255, Ces = 1, SAPI = 0, State = ESTABLISH_AWAITING_TEI
Please see the router config:
SHOW RUN
Building configuration...
Current configuration : 1708 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname AUC_GATEWAY
!
boot-start-marker
boot-end-marker
!
enable secret xxx
!
no aaa new-model
voice-card 0
dspfarm
no local-bypass
!
ip cef
!
!
--More-- !
!
no ip domain lookup
multilink bundle-name authenticated
isdn switch-type basic-net3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
--More-- !
!
!
!
!
!
interface FastEthernet0/0
ip address x.x.x.x 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn layer1-emulate network
isdn incoming-voice voice
--More-- isdn bind-l3 ccm-manager service mgcp
!
interface BRI1/1
no ip address
shutdown
isdn switch-type basic-net3
isdn point-to-point-setup
!
!
ip http server
no ip http secure-server
!
!
!
control-plane
!
!
!
voice-port 1/0/0
compand-type a-law
cptone GB
!
voice-port 1/0/1
--More-- !
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server x.x.x.x
ccm-manager config
!
mgcp
mgcp call-agent x.x.x.x 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp rtp payload-type g726r16 static
!
mgcp profile default
!
!
--More-- !
!
!
line con 0
line aux 0
line vty 0 4
password Wellesb0urne
login
!
!
end
Please see the ISDN STATUS:
AUC_GATEWAY#
*Mar 2 02:12:55.357: ISDN BR1/0 Q921: User TX -> IDREQ ri=11550 ai=127[OK]
*Mar 2 02:12:57.356: ISDN BR1/0 Q921: User TX -> IDREQ ri=65279 ai=127
*Mar 2 02:12:59.359: ISDN BR1/0 Q921: User TX -> IDREQ ri=61168 ai=127
*Mar 2 02:13:01.948: ISDN BR1/0 Q921: User TX -> IDREQ ri=56817 ai=127
*Mar 2 02:13:03.947: ISDN BR1/0 Q921: User TX -> IDREQ ri=48386 ai=127
*Mar 2 02:13:05.950: ISDN BR1/0 Q921: User TX -> IDREQ ri=36131 ai=127
*Mar 2 02:13:11.964: ISDN BR1/0 Q921: User TX -> IDREQ ri=24404 ai=127
SDN BRI1/0 interface
dsl 0, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 255, Ces = 1, SAPI = 0, State = ESTABLISH_AWAITING_TEI
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
Solved! Go to Solution.
11-09-2007 02:56 AM
here, try out this config;
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
!
interface BRI0/3/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
Please also 'compand-type a-law' under voice port. Of course replace the interface numbers with your own.
hth,
Ajaz
11-09-2007 01:58 AM
Hi,
Any chance you need "isdn static-tei 0" in that location? Common for DID and multi-BRI provisioning.
In any case, enable "debug isdn q921" and "term mon" to see what's going on in there.
Hope this helps, please rate post if it does!
11-09-2007 02:56 AM
here, try out this config;
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
!
interface BRI0/3/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
Please also 'compand-type a-law' under voice port. Of course replace the interface numbers with your own.
hth,
Ajaz
11-09-2007 03:23 AM
STATIC TEI command sorted it thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: