11-02-2014 11:45 PM - edited 03-17-2019 12:46 AM
I am having "WS-C4507R-E" switch with "WS-X45-SUP6-E" sup module. I am using "12.2(54)SG1" IOS image. When I am trying to power my new IP Phone or AP's it don't give power. When I see the inline power details it give me below output.
Actual power consumed by the modules is "867 Watt" but the switch is showing as "3118Watt". Please tell the reason of this high power consumption.
I am attaching the output of "show power inline" also.
------------------ show power detail ------------------
Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C45-4200ACV AC 4200W good good good
PS1-1 220V good
PS1-2 220V good
PS2 PWR-C45-4200ACV AC 4200W good good good
PS2-1 220V good
PS2-2 220V good
Power supplies needed by system : 1
Power supplies currently available : 2
Power Summary Maximum
(in Watts) Used Available
---------------------- ---- ---------
System Power (12V) 1040 1042
Inline Power (-50V) 3118 3120
Backplane Power (3.3V) 40 40
---------------------- ---- ---------
Total 4198 (not to exceed Total Maximum Available = 4200)
Power Measurement Inline Power (-50V)
(in Watts) (+/- 50Watts)
------------------ -------------------
PS1 300
PS2 300
------------------ -------------------
Total 600
Watts Used of System Power(12V)
Mod Model budgeted instantaneous peak out of reset in reset
---- ------------------- -------- ------------- ------ ------------ --------
1 WS-X4648-RJ45V-E 92 -- -- 92 10
2 WS-X4648-RJ45V-E 92 -- -- 92 10
3 WS-X45-SUP6-E 260 -- -- 260 260
4 WS-X45-SUP6-E 185 -- -- 185 185
5 WS-X4648-RJ45V-E 92 -- -- 92 10
6 WS-X4648-RJ45V-E 92 -- -- 92 10
7 WS-X4648-RJ45V-E 92 -- -- 92 10
-- Fan Tray 135 -- -- -- --
------------------------- -------- ------------- ------ ------------ --------
Total 1040 -- -- 905 495
Watts used of Chassis Inline Power (-50V)
Inline Power Admin Inline Power Oper
Mod Model PS Device PS Device Efficiency
---- ------------------- ---------------- ---------------- ----------
1 WS-X4648-RJ45V-E 158 147 133 124 93
2 WS-X4648-RJ45V-E 175 163 147 137 93
3 WS-X45-SUP6-E - - - - -
4 WS-X45-SUP6-E - - - - -
5 WS-X4648-RJ45V-E 259 241 193 179 93
6 WS-X4648-RJ45V-E 144 134 107 99 93
7 WS-X4648-RJ45V-E 131 122 98 91 93
------------------------- ---------------- ---------------- ----------
Total 867 807 678 630
04-01-2015 12:08 PM
hello - I have just moved your post to the Topic forums - you had posted your question in an obscure, non-visible, promotional community. Hopefully our community users will see your question now.
04-01-2015 12:40 PM
Hello Muhammad,
Type "show power redundancy-mode" and verify if you are in combined or redundant mode?
If you are in redundant mode, you can configure it for combined mode to provide more power.
To configure combined mode, type:
(config)power redundancy-mode combined
Hope this helps...
Just saw this posting is 5 months old, so I"m sure your trouble is resolved by now. :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide