We are running CUCM 8.6.2 and CUPS 8.6. We are trying to get Jabber for windows working but we keep getting the error "Cannot Communicate to Server". The presence diagnostics shows everything is fine and also our users says they are licensed for Jabber. We want to deploy Jabber for IM purposes only, what might we be missing?
Could be a number of things, before you log in, check the connection type and make sure you log into on premise presence not webex connect. could also be that your node name in presence is different from what you are logging into, so TLS will crap itself.
send us the problem report, says more than a thousand words
============================= Please remember to rate useful posts, by clicking on the stars below.
Please remember to rate useful posts, by clicking on the stars below.
Don't have any experience with Presence but I am logging into the premise based and the am able to login to the end user page with the same credentials. I have added the problem report from the jabber client.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...