Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to make a call through FXO ports to PSTN

Hello,

I've got 2821 router with some FXO ports in a trunkgroup:

voice-port 0/0/0

trunk-group city

cptone RU

timing hookflash-out 500

connection plar 25630

description -= Krsn line 25630 =-

!

voice-port 0/0/1

trunk-group city

dial-type pulse

cptone RU

timing hookflash-out 500

connection plar 4220

description -= Krsn line 05070 =-

!

voice-port 0/0/2

trunk-group city

dial-type pulse

cptone RU

timing hookflash-out 500

connection plar 4216

description -= Krsn line 25082 =-

!

voice-port 0/0/3

trunk-group city

dial-type pulse

cptone RU

timing hookflash-out 500

connection plar 4205

description -= Krsn line 25083 =-

!

voice-port 0/1/0

trunk-group city

dial-type pulse

cptone RU

timing hookflash-out 500

connection plar 4209

description -= Krsn line 25084 =-

!

voice-port 0/1/1

trunk-group city

dial-type pulse

cptone RU

timing hookflash-out 500

connection plar 4246

description -= Krsn line 25086 =-

!

voice-port 0/1/2

trunk-group city

dial-type pulse

cptone RU

timing hookflash-out 500

connection plar 4247

description -= Krsn line 25106 =-

!

voice-port 0/1/3

trunk-group city

dial-type pulse

cptone RU

timing hookflash-out 500

connection plar 4203

description -= Krsn line 25073 =-

!

voice-port 0/2/0

trunk-group city

dial-type pulse

cptone RU

timing hookflash-out 500

connection plar 4208

description -= Krsn line 25074 =-

dial-peer voice 100 pots

trunkgroup city

destination-pattern 98..........

prefix 8,,

!

dial-peer voice 110 pots

trunkgroup city

description -= Calls Via City Lines =-

service mgcpapp

destination-pattern 9[12345679]....

forward-digits 5

The problem is:

approx. 1/3 of all outgoing calls from IP phones to PSTN return immediate short disconnect tones, while ALL of voice ports of the trunk group are NOT busy (dorm,on-hook).

debug voice ccapi error gives:

*Jul 10 16:06:42.757: //4859/xxxxxxxxxxxx/CCAPI/ccGetCallGCID:

Bad Call ID: callEntry=NULL

*Jul 10 16:06:42.757: //4859/xxxxxxxxxxxx/CCAPI/ccSetCallGCID:

Bad Call ID: callEntry=NULL

What does this mean?

Also, debug voice ccapi inout gives:

*Jul 10 16:29:21.773: //4889/009312161511/CCAPI/cc_api_call_disconnected:

Cause Value=34, Interface=0x4927636C, Call Id=4889

*Jul 10 16:29:21.773: //4889/009312161511/CCAPI/cc_api_call_disconnected:

Call Entry(Responsed=TRUE, Cause Value=34, Retry Count=0)

As i remember, Cause Value=34 is " no circuit/channel available"

Any advice will be appreciated.

Thanks in advance.

2 REPLIES
New Member

Re: Unable to make a call through FXO ports to PSTN

No ideas?.. Please, ANY advice would be nice...

Re: Unable to make a call through FXO ports to PSTN

Hi Nathan,

The few snippets you sent are not related to your problem. They just have the word "bad" in them :)

We normally do not see cause value 34 for FXO ports. The remaining options are that the ports are getting stuck, or you have dial peer/plan problems and you are routing your calls somewhere else or all fighting for a single port. Very hard to say without more information.

-nick

1065
Views
0
Helpful
2
Replies
CreatePlease login to create content