I have a Call Manager Business Edition with a 2851 SRST voice gateway. When is SRST mode the sets register but I am unable to make a outbound call. I have turned on the debug isdn q931 but do not see the phone hitting the gateway while making the outbound call. I have some dial-peers configured but not sure why their are not being used. Am I mising somthing?
I have changed the sourse IP address to be the SRST router and I still can not make an outbound call. I have turned on the deb isdn q931 and do not see the calls hitting the gateway. What else is wrong or what more could be missing?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...