Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Unallocated/Unassigned message on phone

I have Callmanager with 6608 PRI GW and remote CME. Callmanager to CME calls should go through a gatekeeper, and it works fine. If GK is not available, calls need to be re-routed via local 6608 GW. when that happens, the originating Callmanager phone should see the message "Unallocated/Unassigned" on the phone.

I tried with following commands,

call fallback reject-cause-code 1

call fallback active

but, I do not see any message on the originating phone.

Can you please tell me how to accomplish this?

2 REPLIES

Re: Unallocated/Unassigned message on phone

What IOS are you running?

New Member

Re: Unallocated/Unassigned message on phone

GK/WAN router 2651XM 12.4.3e (c2600-ipvoice_ivs-mz.124-3e.bin)

Callmanager 4.1.3sr4d

SW6000 with 6608 cat6000-sup2k8.8-4-1.bin

Thanks Kelvin.

117
Views
0
Helpful
2
Replies