Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Understanding CVP configuration

Hi All,

I have one ICM plus two CVPs.

I have ,as per attachment,under local static routes any calls routed to 802 or 808 must go to 10.255.70.11 (CUCM Server).

I understand the follows:

After running the script logic on ICM,the call goes to CVP for sending the call to CUCM.CVP sends any calls with destination beginning with 802 or 808 to CUCM with ip address 10.255.70.11 as per settings under local static routes.right?

Please confirm do i understand right or not?

Note :

I have NOT any SIP proxy servers.

131
Views
0
Helpful
0
Replies
CreatePlease to create content