Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unified comms manager QOS markings

I see from vdocs that Communications manager uses many varied ports for communicating with endpoints,otherservers and gateways etc.

Does it mark all these packets as CS3, so All i need to do is classify cs3 as opposed to having to try and cover all the port numbers?

1 REPLY
Silver

Re: Unified comms manager QOS markings

In order to apply QoS mechanisms for a Cisco IPT solution you will need to identify traffic that handle the following markings:

Voice Streams = DSCP EF or 46

IP precedence 5

Call signaling streams = DSCP AF31 or 26 / CS3 or 24

IP precedence 3

The traffic that uses the ports is marked with DSCP AF31 or 26 / CS3 or 24 / IP precedence 3.

Quality of Service on Cisco CallManager:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801ffe28.shtml

97
Views
0
Helpful
1
Replies