Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Unified Communications Manager 6.0 NIC teaming

Hello,

I can't find nothing additionally to the below paragraph in "Callmanager release notes for v5" about Ethernet redundancy for any version after this ******************"Cisco CallManager 5.0(1) does not support NIC teaming. Be aware that if you were using NIC teaming with a Windows-based version of Cisco CallManager, you will not be able to use it after you upgrade to Cisco CallManager 5.0(1)."

Then is not possible to have ethernet redundancy for one server?

1 REPLY
Cisco Employee

Re: Unified Communications Manager 6.0 NIC teaming

set network failover

This command enables and disables Network Fault Tolerance on the Media Convergence Server network interface card.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_0_1/cucos/iptpappa.html#wp1051765

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
179
Views
10
Helpful
1
Replies