I have logged in the CUPC succesfully the first time using the ip of the publisher.Then i rebooted the publisher and i tried to logging with the ip of the subscriber unfortunatelly with out success. IF the publisher is down then the clients for CUPC can use the ip for publisher?
Do you have any idea?
i am using load balancing for the users assignment and when i rebooted the publisher all the users then associated with the subscriber
Also what is the needs for the srv if you know? i have to configure it for HA or is not neccessary
Please rate all useful posts
""The Most Successful People Are Those Who Are Good At Plan B""
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...