Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Unified SRST Issue

Hi all,

I've configured a unified SRST with MGCP fallback and I think everything is configured properly, but phones never try to register With the SRST,

so, when I issue the command debug ephone detail. nothing appears.

I'm using CUCM 8.6.2  >> 10.10.50.8

gateway MGCP 2951   >> 192.168.93.2

and by the way that SRST is in the Local location not the remote one.

your help is much really appreciated

  • IP Telephony
11 REPLIES
Blue

Unified SRST Issue

Hi

Please send the config done in your CUCM. Have you given config about your SRST ip address in CUCM SRST config.

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Unified SRST Issue

Make sure the CME/SRST License is active. You can verify that by using the command show license detail cme-srst.

Hope this would help!

New Member

Unified SRST Issue

Hi Amine,

thank you so much for that.

here you are My license status t's active)

        Feature: cme-srst                          Version: 1.0

        License Type: EvalRightToUse

        License State: Active, In Use

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 2  days

            Period used: 1  day  2  hours

            Transition date: Sep 26 2013 12:09:25

        License Count: 95/0  (In-use/Violation)

        License Priority: Low

        Store Index: 7

        Store Name: Built-In License Storage

New Member

Unified SRST Issue

Hi Norak,

thanks for your keen interest, the configuration done on my CUCM is

and that SRST is assigned to the Device pool which is assigned to that site phones.

Blue

Unified SRST Issue

hi

Send us  sh telephony-service output.

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

Unified SRST Issue

Hi Ronak,

I'm not using CME SRST, I'm using unified SRST with MGCP Fallback.

the Telephony service isn't activated at all in unified SRST.

and here you are below my show call-manager-fallback result.

#sh call-manager-fallback

CONFIG (Version=9.0)

=====================

Version 9.0

Max phoneload sccp version 17

Max dspfarm sccp version 18

For on-line documentation please see:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html

ip source-address 192.168.93.2 port 2000

ip qos dscp:

ef (the MS 6 bits, 46, in ToS, 0xB8) for media

cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal

af41 (the MS 6 bits, 34, in ToS, 0x88) for video

default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup

max-ephones 85

max-dn 85 dual-line

max-conferences 8 gain -6

dspfarm units 0

dspfarm transcode sessions 0

huntstop

no huntstop channel

huntstop channel 0

cnf-file location: system:

cnf-file option: PER-PHONE-TYPE

network-locale[0] US   (This is the default network locale for this box)

network-locale[1] US

network-locale[2] US

network-locale[3] US

network-locale[4] US

user-locale[0] US    (This is the default user locale for this box)

user-locale[1] US

user-locale[2] US

user-locale[3] US

user-locale[4] US

srst mode auto-provision is OFF

srst ephone template is 0

srst dn template is 0

srst dn line-mode single

moh music-on-hold

time-format 12

date-format dd-mm-yy

timezone 0 Greenwich Standard Time

no transfer-pattern is configured, transfer is restricted to local SCCP phones only.

cor incoming international 1 1001-1013

cor incoming international 2 1229,1257,1305,1280,1054,1077,12

cor incoming international 3 1304,1306,1130,1277,1101,2222,12

cor incoming longdistance 4 1103,1027,1029,1028,1031,1111,11

keepalive 30 auxiliary 30

timeout interdigit 10

timeout busy 10

timeout ringing 180

timeout transfer-recall 0

timeout ringin-callerid 8

timeout night-service-bell 12

caller-id name-only: enable

system message primary SRST Fallback

Limit number of DNs per phone:

  12SP: 76

  7902: 76

  7905: 76

  7906: 76

  7910: 76

  7911: 1

  7912: 76

  7920: 76

  7921: 76

  7925: 76

  7931: 76

  7935: 76

  7936: 76

  7937: 76

  7940: 76

  7941: 76

  7941GE: 76

  7942: 1

  7945: 76

  7960: 1

  7961: 76

  7961GE: 76

  7962: 1

  7965: 76

  7970: 1

  7971: 76

  7975: 76

  7985: 76

  anl: 76

  ata: 76

  bri: 76

  CIPC: 1

  vgc-phone: 76

  IP-STE: 76

  6921: 1

  6941: 76

  6961: 76

  6901: 76

  6911: 76

  7926: 76

  6945: 76

  8941: 76

  8945: 76

Log (table parameters):

     max-size: 150

     retain-timer: 15

transfer-system full-consult

transfer-digit-collect new-call

multicast moh 239.1.1.1 port 16384

local directory service: enabled.

Extension-assigner tag-type ephone-tag.

Appreciated

Blue

Unified SRST Issue

Sorry My mistake.. I just wanted that output. Instead of SRST i gave CME command.

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

Re:Unified SRST Issue

No worries Ronak,
Have you found anything yet?
By the way, that SRST is configured as an mgcp gateway, and all the FXO ports are registered.


Sent from Cisco Technical Support Android App

New Member

Re:Unified SRST Issue

Hi Gents,

there is something I'm suspecting in which is related to my license

when I do #show license detail, I got these results.

SUK-Router#sh license all

License Store: Primary License Storage

StoreIndex: 0   Feature: ipbasek9                          Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

  • StoreIndex: 1   Feature: uck9                              Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

License Store: Built-In License Storage

StoreIndex: 0   Feature: securityk9                        Version: 1.0

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second 

        License Count: Non-Counted

        License Priority: None

  • StoreIndex: 1   Feature: uck9                              Version: 1.0

        License Type: EvalRightToUse

        License State: Inactive

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second 

        License Count: Non-Counted

        License Priority: None

StoreIndex: 2   Feature: datak9                            Version: 1.0

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second 

        License Count: Non-Counted

        License Priority: None

StoreIndex: 3   Feature: gatekeeper                        Version: 1.0

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second 

        License Count: Non-Counted

        License Priority: None

StoreIndex: 4   Feature: SSL_VPN                           Version: 1.0

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second 

        License Count: 0/0  (In-use/Violation)

        License Priority: None

  • StoreIndex: 7   Feature: cme-srst                          Version: 1.0

        License Type: EvalRightToUse

Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 2  days

            Period used: 1  day  3  hours

            Transition date: Sep 27 2013 03:12:31

        License Count: 95/0  (In-use/Violation)

        License Priority: Low

        Store Index: 7

        Store Name: Built-In License Storage

is it ok this way that I'm having SRST License now, or not, because I see it's just an evaluation, and I see also two indexes for uck9 feature one of them is permanent and the other is for evaluation.

what does that means? and is that might be causing my case?

563
Views
0
Helpful
11
Replies
This widget could not be displayed.