You'll need to ensure that the customer has a UCSS contract in place for all of their mailboxes; the quantities should match between configured mailboxes and the quantity shown on the UCSS agreement. Once that is done you can log into PUT and place an upgrade order. You'll want to migrate them to Unity Connection; traditional Unity is dead.
If the customer does not have an active UCSS contract you'll need to provide an a-la-carte upgrade quote. The Ordering Guides will walk you through that.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...