Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Bronze

Unity 7.0 support exchange 2007 cluster yet??

Hi all,

Last time I checked, Cisco tac said it will be coming out soon. Anyone know?

Thanks

Ken

7 REPLIES
Hall of Fame Super Red

Re: Unity 7.0 support exchange 2007 cluster yet??

Hi Ken,

Here is the relevant info :)

Cisco Unity 7.0 for Microsoft Exchange

New for Cisco Unity 7.0

Microsoft Exchange 2007 and Outlook 2007 IMAP are supported.

Message store support: Microsoft Exchange 2000, 2003, and 2007

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps2237/data_sheet_c78-478111.html

Hope this helps!

Rob

Bronze

Re: Unity 7.0 support exchange 2007 cluster yet??

Hi Rob,

Thanks for quick respond. However, it doesn't say anything about support exchange 2007 cluster.

I knew that it did not support 2007 cluster before for Unity 7.0.

Thanks

Ken

Hall of Fame Super Red

Re: Unity 7.0 support exchange 2007 cluster yet??

Hi Ken,

Sorry ...my bad!

As of 16/Jan/2009 the latest Unity 7.x release;

Release Notes for Cisco Unity Release 7.0(2)

Cisco Unity with Exchange: Exchange 2007 Clustering Is Not Supported

Cisco Unity 7.x does not support Exchange 2007 clustering. If you want to use Exchange 2007 clustering, you must use Cisco Unity 5.0.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/release/notes/702curelnotes.html#wp49056

Hope this helps!

Rob

Hall of Fame Super Silver

Re: Unity 7.0 support exchange 2007 cluster yet??

Actually the latest I heard is that most clustering modes are now supported with Unity 7, don't believe it is documented anywhere yet, but I would recommend inquiring with Cisco.

HTH,

Chris

Community Member

Re: Unity 7.0 support exchange 2007 cluster yet??

Supported with ES 17. Although, ES 19 is out now, I hope 19 includes the fix too.

Cisco Employee

Re: Unity 7.0 support exchange 2007 cluster yet??

Unity ES are not accumulative as CUCM ESs

Exchange Requirements-Message Store Clustering

Revised February 2, 2009

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/requirements/7xcusysreq.html#wp472813

best review the RNs of each ES and not hope the fix is there

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: Unity 7.0 support exchange 2007 cluster yet??

The read me file for ES 19 states:

Overview

This Engineering Special is a roll-up of these Engineering Specials, 1, 4, 6, 7 through 10, 14, 15, 17 and three patches. A complete list of defects addressed can be found in the section titled Defects.

Cisco recommends reading and understanding all relevant documentation prior to applying the Engineering Special and patches.

140
Views
0
Helpful
7
Replies
CreatePlease to create content