Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity 7 Bulk Edit command

Need to change Subscriber / Call Transfer/ Transfer incoming calls to a phone/ to Yes, ring extension for.

Do you know the comparable setting in Unity Bulk Edit ?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Unity 7 Bulk Edit command

After selecting the subscribers to update using the bulk edit tool:

1) Click on the transfer tab

2) Select the appropriate tab that you would like to update (standard, closed or alternate)

3) Set "Ring Phone" to True

4) Set "Set transfer number to be subscribers extension" checkbox as checked

Click next and then finally click update subscribers tab.

Always try this on a test user or two before applying in bulk to verify it is what you want.

2 REPLIES
Bronze

Re: Unity 7 Bulk Edit command

After selecting the subscribers to update using the bulk edit tool:

1) Click on the transfer tab

2) Select the appropriate tab that you would like to update (standard, closed or alternate)

3) Set "Ring Phone" to True

4) Set "Set transfer number to be subscribers extension" checkbox as checked

Click next and then finally click update subscribers tab.

Always try this on a test user or two before applying in bulk to verify it is what you want.

New Member

Re: Unity 7 Bulk Edit command

That was it. thanks

Forgot the "Ring Phone" piece

123
Views
0
Helpful
2
Replies