Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

Unity 7 - Exchange - Memory Problems


I have a 7845H2 with 4GB ram. I am installing the Unity bundle from Cisco. This is Windows 2003 Standard and Exchange 2003, then Unity 7. I will have 200 Unity ports (max ports). This is a standalone box with no failover and message store on box. AD and DNS are on a separate server.

The Unity documentation says that when you have more that 96 ports to add the /3GB keyword to the WinOS boot.ini file.

However, when I boot into Win2003 the OS only recognises 3.25GB of system memory. I've found that by adding the keyword /PAE to the boot.ini file all the memory is recognised by the OS. However, Exchange now has a problem.

MSExchangeSA fails to start and since MessageStore is dependent on this, this fails too = system unusable. When I remove the /PAE switch then everything boots correctly but only 3.25GB of RAM is available. Also, a message "the memory settings for this server are not optimal for Exchange" is written to event viewer.

Please advise on how I can resolve this?


Community Member

Re: Unity 7 - Exchange - Memory Problems

boot.ini needs /pae /userva=3030

hope this helps others

CreatePlease to create content