Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Unity 7.x with exchange 2k3 to 2k7

On the unity side, when migrating from exchange 2003 to 2007, is there anything that needs to be done?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Unity 7.x with exchange 2k3 to 2k7

Hi!

First of all make sure your Unity version supports Exchange 2007! It should be 5.X or later as you have 7.X you are good to go!

Then, as the partner exchange server will be changed you will need to run the Message Store Configuration Wizard again and check the permissions too.

Please refer to this link, it covers the procedure you need to follow:

*** Upgrading Exchange 2000 or 2003 to Exchange 2007 for Cisco Unity 5.x Without Failover ***

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge130.html#wp1359133

HTH!

Regards,

Teresa.

If this helps, please rate :)

Regards, Tere. If you find this post helpful, please rate! :)
2 REPLIES

Re: Unity 7.x with exchange 2k3 to 2k7

Just follow this link and you will be set on everything you need to make the transition.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge050.html

Cisco Employee

Re: Unity 7.x with exchange 2k3 to 2k7

Hi!

First of all make sure your Unity version supports Exchange 2007! It should be 5.X or later as you have 7.X you are good to go!

Then, as the partner exchange server will be changed you will need to run the Message Store Configuration Wizard again and check the permissions too.

Please refer to this link, it covers the procedure you need to follow:

*** Upgrading Exchange 2000 or 2003 to Exchange 2007 for Cisco Unity 5.x Without Failover ***

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge130.html#wp1359133

HTH!

Regards,

Teresa.

If this helps, please rate :)

Regards, Tere. If you find this post helpful, please rate! :)
146
Views
5
Helpful
2
Replies
CreatePlease to create content