Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

tka
New Member

Unity Connection administration password recovery procedure

Hi ,

How could I reset a Unity Connection administration lost login and password?

We have a valid login / password for Operating System console.

best regards,

3 REPLIES
Hall of Fame Super Red

Re: Unity Connection administration password recovery procedure

Hi Ramzi,

Password Recovery Procedure for Cisco Unity Connection

http://www.cisco.com/en/US/products/ps6509/products_password_recovery09186a00807ca680.shtml

Hope this helps!

Rob

New Member

Re: Unity Connection administration password recovery procedure

Hi,

I have the same problem with Unity connection 7.X, idea??

Martin

Hall of Fame Super Red

Re: Unity Connection administration password recovery procedure

Hey Martin,

Resetting Administrator and Security Passwords

If you lose the administrator password or security password, use the following procedure to reset these passwords.

To perform the password reset process, you must be connected to the system through the system console, that is, you must have a keyboard and monitor connected to the server. You cannot reset a password when connected to the system through a secure shell session.
Caution The security password on all nodes in a cluster must match. Change the security password on all machines, or the cluster nodes will not communicate.
Caution You must reset each server in a cluster after you change its security password. Failure to reboot the servers (nodes) causes system service problems and problems with the Cisco Unified Communications Manager Administration windows on the subscriber servers.

Note During this procedure, you must remove and then insert a valid CD or DVD in the disk drive to prove that you have physical access to the system.

Procedure

Step 1 Log in to the system with the following username and password:

•Username: pwrecovery

•Password: pwreset

The Welcome to platform password reset window displays.

Step 2 Press any key to continue.

Step 3 If you have a CD or DVD in the disk drive, remove it now.

Step 4 Press any key to continue.

The system tests to ensure that you have removed the CD or DVD from the disk drive.

Step 5 Insert a valid CD or DVD into the disk drive.

Note For this test, you must use a data CD, not a music CD.

The system tests to ensure that you have inserted the disk.

Step 6 After the system verifies that you have inserted the disk, you get prompted to enter one of the following options to continue:

•Enter a to reset the administrator password.

•Enter s to reset the security password.

•Enter q to quit.

Step 7 Enter a new password of the type that you chose.

Step 8 Reenter the new password.

The password must contain at least 6 characters. The system checks the new password for strength. If the password does not pass the strength check, you get prompted to enter a new password.

Step 9 After the system verifies the strength of the new password, the password gets reset, and you get prompted to press any key to exit the password reset utility.


Resetting Administrator and Security Passwords

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/os_administration/guide/7xcucosag020.html#wp1044244

Cheers!

Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727

8078
Views
0
Helpful
3
Replies