I am trying to integrate CUCM 7.1 with unity 7.0. i have completed the configuraiton in CUCM, In unity connection when adding the AXL Server when i click on phone system and click on EDIT cisco unified communications manager AXL server is not highlited.What could be the problem. without this if i try to add the i can only add 1 port. and that was first time. And from then i cant again add the prot group. Kindly help me in this.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...