05-19-2009 08:02 PM - edited 03-15-2019 06:05 PM
Hi,
Unity connection & CCM is integrated properly & all the vocie ports are registered in CCM. I am able to send & read Voice Mails. Voice Pilot no is working fine. But the problem is MWI On/Off is not showing once msg is delivered or read out....plz suggest..
05-19-2009 10:27 PM
When you dial MWI on/off numbers from the phone does the red light comes up ?
For example the mwi on off numbers and 7001 and 7002. If you dial those numbers does the red light turns on and off ?
- check the setting under "Telephony Integration" -->"Phone System"
-also check Search Users ----> Edit User Basics ---> Message Waiting Indicators
05-20-2009 02:43 AM
Yes, from our phone system when we dial the MWI ON number it Glow & after pressing MWI OFF it goes...
05-19-2009 11:23 PM
Check your CSS and partitions for MWI lights on/off, VM ports and phones.
Voice mail ports should have access to MWI numbers and MWI numbers should be able to access phones.
Some more information about CSS and partitions:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/dialplan.html#wp1044276
05-21-2009 11:41 AM
Hi,
User phones & MWI ON/OFF numbers are in same CSS & Partition...Still the problem is happening..any sort of help would be appreciated..
05-21-2009 11:42 AM
Hi,
SUer phones & MWI ON/OFF numbers are in same CSS & Partition...Still the problem is happening..any sort of help would be appreciated..
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: