Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Unity Connection

Hi All,

we have CUBE with unity connection. two companies are using one unity connection. we want to seperate voicemail system which if call comes in for campany A and hit unity connection, unity connection won't be able to dial extension in company B. totally seperate!

what is the best solution for this scenario? Create CSS and partition and assign to voice port which the voice port can't dial another voice port? or create two port groups in Unity connection?

thanks

Alex

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Unity Connection

the only way to achieve that is if you have CUC 7.0 which provides a similar concept to partitions and CSS. on previous versions this cannot be achieved as all DNs configured are available to any subscriber or user dialing in, even if you create 2 integrations unity will try to dial the DN and will recognize it

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1 REPLY
Cisco Employee

Re: Unity Connection

the only way to achieve that is if you have CUC 7.0 which provides a similar concept to partitions and CSS. on previous versions this cannot be achieved as all DNs configured are available to any subscriber or user dialing in, even if you create 2 integrations unity will try to dial the DN and will recognize it

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
297
Views
0
Helpful
1
Replies
CreatePlease to create content