Hello all, I am having a dickens of a time finding solution for this issue. I have the following (my concern is in the eth1 output below), I am thinking it is probably a switch configuration issue at this point, but as I do not have access to the customer's switches, I thought I would run it past the group here. I've not found anything in the forums on this yet, so thanks in advance for any help.
I am getting port alarms that show this information from our CUOM:
OperationallyDown: Interface card or network adapter operational state is not normal::Component= IF-CZTUSPINJ01VM03/4 [eth1]; AdminStatus= UP; DuplexMode= HALFDUPLEX; OperStatus= DOWN; MaxSpeed= 10000000; Type= ETHERNETCSMACD; Mode= NORMAL
Unity Connections -
admin:show version active
Active Master Version: 18.104.22.168900-10
Active Version Installed Software Options:
HW Platform : 7845I3 Processors : 2 Type : Intel(R) Xeon(R) CPU E5540 @ 2.53GHz CPU Speed : 2530 Memory : 8192 MBytes Object ID : 22.214.171.124.126.96.36.199.587 OS Version : UCOS 188.8.131.52-39
admin:show network failover Bond 0 DHCP : disabled Status : up IP Address : 184.108.40.206 IP Mask : 255.255.255.240 Link Detected: no Mode : Auto disabled, N/A, N/A
Ethernet 0 DHCP : disabled Status : up IP Address : IP Mask : Link Detected: yes Mode : Auto disabled, Full, 100MB/s
Ethernet 1 DHCP : disabled Status : up IP Address : IP Mask : Link Detected: no Mode : Auto disabled, Unknown! (255), 100MB/s <<< Here is concern
DNS Primary : Secondary : Options : timeout:5 attempts:2 Domain : localdomain Gateway : 220.127.116.11 on Ethernet bond0
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.